• Fiat Panda 100HP

The Fiat Panda is a very small cars from Fiat, the first series of the spring of 1980 was built until the fall of 2003 over four million copies. He is thus one of the most successful models of the brand.

That by its designer Giorgio Giugiaro as a "home appliance on wheels" characterized car fell on its angular, smooth-faced form – even the windows were flat. With this design, and a Spartan interior of the Panda could be especially manufactured at low cost and offered (in 2000 in Italy for about 5,000 euros), for example, reminded the seats strung steel tube frame (first series and subsequent base models) to Camping furniture. End of 1996, Fiat took the panda of the European markets (except in the home), which was attributed to the strict emission standards and safety regulations. With its minimalist, functional-oriented design of the Panda in the tradition of Citroën 2CV and Renault 4 How is this he was not only a "Volkswagen", but his property was considered by many to also be the expression of a non-conformist and consumerist life-critical attitude that Status symbols does not wish to or rejecting. Was also emphasized by a very popular Panda campaign in Germany ("Fiat Panda – the great chest"), the practicality, economy and ecology presented in the foreground.

In 2003, Fiat a completely redesigned version of the Panda as Nuova Panda ago. This model was originally to be marketed as Fiat Gingo. Was built the new Panda to 2012 in the Polish Tychy.

The third generation of the Panda was first introduced in 2011 and produced since 2012 in the former Alfa Romeo factory at Pomigliano d’Arco (Naples). In December 2012, the Panda 4 × 4 III got the award "SUV of the Year" (SUV of the Year) by the prestigious Top Gear Magazine awarded.

The nearly 700-pound panda was from March 1980 offered only as a three-door with a large tailgate (type designation: 141). On request, a two-piece folding roof was available. Three engines were available; the smallest version was an air-cooled parallel twin with 650cc and a power output of 30hp (22 kW) from the previous Fiat 126 There was also water-cooled four-cylinder with 847/903cc and a power of 34/45 PS (25/33 kW), which had already been built for the Fiat 850.

Beginning in 1986 Fiat built the Panda with so-called "FIRE" engines (for Fully Integrated Robotized Engine). These were handled by robots and mounted. They have fewer moving parts than the older OHV engine, a gear belt driven overhead camshaft and a five-bearing crankshaft. All FIRE engines in the Fiat Panda are 8-valve engine with 769/999/1108cc and 34/44 +45/50 +55hp (25/32 +33/37 +40 kW). For mixture preparation Fiat used first exclusively Weber Single carburetor; from the introduction of the catalyst injection systems were installed with a central injector, in 1987, the Bosch Mono-Jetronic, delivered from 1992 Weber SPI (Single Point Injection) and from 2000 as MPI (Multi Point Injection).

A novelty was the Panda Selecta. Instead of the now standard 5-speed manual transmission, a continuously variable transmission (ECVT) was used with thrust belt and magnetic powder clutch. The ECVT transmission based on the DAF VARIOmatic; it was further developed by Fiat and produced by Fuji Heavy Industries.

Between 1986 and 1992 there was the panda as version "D" with a derived from the Fiat Uno 1301cc diesel engine that had 39hp (29 kW).

The first version of the Fiat Panda was built from March 1980 to January 1986 ("MC1"). To her as: Panda 30 Panda 34 Panda 45 and the first four-wheel versions Panda 4 × 4

In January 1986, the Panda was equipped with the new Fire engine and subjected to extensive revision. The sheet metal grille was replaced by a plastic and the rear license plate was no longer attached to the tailgate, but on the bumper. In addition, a variant Panda Van was offered a kind of two-seat mini vans with rear door and flaps of sheet metal instead of the rear side windows.

The rigid rear axle was sprung not by leaf springs, but with coil springs and trailing arms and performed on a rubber mount on the axle tube. The tube was bent to the front (omega-axis). Muffler and tank sitting at newer models behind instead of in front of the rear axle. The interior received a facelift in early 1986.

The series comprised by the beginning of 1986, carried out transformation ("MK2") initially only the models Panda 750 (769cc) and Panda 1000 (999cc). Later, the car was offered with the 900 engines (no fire-engine) and 1100 (1108cc).

In the fall of 1991, again followed by a slight internal and external revision.

Fiat Panda (1986-1991)

Fiat Panda Van (1986-1991)

Fiat Panda (1991-2003)

From June, 1983 to an all-terrain Panda 4 × 4 was offered with all-wheel drive, which also took part in the Paris-Dakar Rally. The all-wheel drive was developed by Steyr Puch in Graz, the complete car was assembled in Austria. The engine of the 850-kg car had 948cc and 48hp. From 1986, the "FIRE engine" with 999cc and 45hp or 50hp was, from 1991, the 1108-cc engine with 50 PS (37 kW), later with 54hp (40 kW) installed.

In 1990, the Panda Elettra was introduced. In this model, there was a vehicle with an electric motor. His biggest problem was the heavy twelve 6-volt lead-gel batteries that raised the weight up to 1240kg. From the Elettra series, which was mostly used in small number of Italian municipalities, there was next to the Panda nor the Fiat Seicento and the Fiat Ducato. According to the manufacturer, the Panda Elettra was in city traffic ranges reaching up to 70km.

In Spain, the Fiat Panda by autumn 1980 was built until the late summer of 1985 by the former subsidiary Seat under the name Seat Panda. The cars were nearly identical. From the autumn of 1985 Seat built the original Panda in slightly modified form as Seat Marbella until the end of 1998 on.

In the fall of 2003 came a completely new Fiat Panda (type designation: 169) on the market, which was voted Car of the Year 2004. He was bigger, stronger and richer motorized equipped with the old model, only the name in common is compared to this. Produced this panda in the Polish Tychy.

The Nuova Panda was built only as a five-door hatchback. The engine range consisted of three petrol engines (1.1 with 40 kW/55hp, 1.2 with 44 kW/60hp and 74 kW/100hp with 1.4), and a turbodiesel with common-rail injection, the 51 kW (70hp) made. There was also a "race" (Panda 100HP), who owned a sport suspension and a 1.4-liter engine with 74 kW/100hp. The plan was also an Abarth version with 99 kW/135hp (1.4 Turbo).

The new Panda was consistently the best-selling car in its class in Europe since its launch.

Originally, the new Panda was to be called "gingo". Therefore, the first second-generation Fiat Panda also wore a sign with the original name. In fan circles he is affectionately referred to as "gingo" to point out the differences.

In January 2005, the four-wheel drive version was added Panda 4 × 4. He could be seen, among other things on the transverse muffler and the somewhat larger ground clearance.

In January 2006, a variant of the 4 × 4 was introduced as Panda "Cross", which was only available with the 1.3 Multijet 16V diesel (51 kW).

As of January 2007, the Panda was also available as a natural gas vehicle. The Panda "Natural Power" was the first vehicle in its class with underfloor technology. This was achieved by the platform of the Panda 4 × 4, on the new version had built.

The natural gas-Panda is driven by a process known from other models in the range 1.2-liter four-cylinder engine that can be operated by its bivalent interpretation either natural gas or gasoline. He makes operating in the gas 38 kW (52hp) and run on petrol 45 kW (60hp). The consumption of natural gas operation to 100km 4.2kg of natural gas or 6.2 liters per 100 kilometers in the gasoline mode. When utilizing two tanks of fuel (13 Kilograms of natural gas, 30 gallons of gasoline), the range is approximately 750 kilometers.

In autumn 2010, the engine range has been greatly reduced. From then on, there were only one petrol engine (1.2 8V 51 kW), diesel (1.3 Multijet 16v 55 kW) and a natural-gas version (1.4 8V 57 kW and 51 kW) in the program. Beginning of 2011 were also the Panda 100HP and the Panda "Cross" removed from the program.

In the late summer of 2012, the remaining Panda variants were adjusted.

Cockpit

In 2006, Fiat sued the Chinese carmaker Great Wall, as the model "Peri" the design of the Fiat Panda copied. In the middle of 2008, Fiat won the lawsuit, making imports of vehicles was stopped after Europe. In addition, the Chinese carmaker 15,000 euros compensation must be paid to Fiat and the future for each additional import 50,000 euros.

At the IAA 2011 in Frankfurt, the third generation of the Fiat Panda was introduced to the public.

Although the official launch in Germany on March 3, 2012 was announced, the first traders were already supplies 30 January with new cars of the new generation. There are four different engines available.

Although the third generation of the Fiat Panda newly appears compared to the previous model, it is based on the same kit.

Over time, this kit has been updated for the newly adapted models: 2007 for the Fiat 500, 2011 for the Lancia Ypsilon and for the new Fiat Uno on the Brazilian market. With these models, the new Panda also shares certain aesthetic details. Compared to the predecessor introduced in the fall of 2003, the vehicle has grown a few inches, to increase the passive safety of the chassis and the interior.

The concept of the new Fiat Panda does not differ much from the previous version. Based on the success of the model in the past, the mission of the product remains unchanged. The vehicle is a rational product, especially oriented practical and give priority to comfort, roominess and versatility. The car was conceived as a union of the two previous models. Some distinctive elements of the model of the 80s, were also taken from technical or country-specific reasons were lost in the 2003 model in favor of other solutions. One of these solutions is for example the dashboard characteristic with open glove compartment of the first model, which the dimensions of the front passenger airbags were in the second generation victim. However, if the appearance of the first generation considered, the concept of the new Fiat Panda seems to be a completely new. While the third generation practical car remains, it appears externally not very deliberate in the aesthetic details and strictly. The car surpasses the expectations that were provided to the previous models and also appeals to those that put more emphasis on style and charm.

The production facility is located in Pomigliano d’Arco (Naples). You will probably be able to produce up to 1,000 units per day. The shift of the production of the Fiat Panda from the plant in Tychy (Poland) was necessary because it is already at full capacity by the production of the Fiat 500. The shift to the new plant is part of a new national project, in which Fiat plans to double car production in Italy. On this occasion, was the Pomigliano (formerly Alfa Romeo) in Italy rebuilt it.

* Eco-operated with key

Aktuelle Modelle (Europa): 500 | 500L | 500L Living | 500L Trekking | Bravo | Doblò | Freemont | Linea | Palio | Panda | Punto | Qubo | Ducato | Fiorino | Scudo | Sedici | Strada

Current models (more, most): Albea | Mille | Nuevo Uno | Siena | Petra | Perla

Historic Commercial Vehicles: 170 | 190 | 238 | 241 | 242 | 300 | 615 | 616 | 619 | 640 | 642 | 643 | 645 | 673 | 680 | 682 | 690 | 693 | 850 T | 900 | 1100 ELR | 1100 t | Campagnola | Daily | Marengo | Penny | S series | Talento | Z series

Historische Pkw 1922-1945: 508 | 509 | 510 | 512 | 514 | 515 | 518 | 519 | 520 | 520 Superfiat | 521 ​​| 522 | 524 | 525 | 527 | 1100 | 1500 | 2800

Historische Pkw 1901-1922: 3.5 HP | 8 HP | 10/12 HP | 12/16 HP | 12/20 HP | 15/20 HP | 15/25 HP | 16/20 HP | 18/24 HP | 24/32 HP | 24/40 HP | 28/40 HP | 50/60 HP | 60 HP | Tipo 0 | 0 Tipo A | Tipo 1 | Tipo 1 bus | Tipo 1 A | Tipo 2 | 2 Tipo B | Tipo 3 | Tipo 3 A | Tipo 3 TER | Tipo 4 | 5 Tipo | Tipo 6 | 7 Tipo

Racing cars and prototypes: 530 | 8V | Lombardi GP | Mefistofele | Panda Hydrogen | Turbina

135